Automatic unpaid breaks on café timecards: set them per person, fix them when they're wrong
21 November 2026
Most café staff don't punch out for their break. They eat standing up, between a rush and the next one, and the timecard says they worked eight straight hours. Then you're adjusting the hours by hand every pay run.
Servatto can take the break off for you. It's off until you switch it on, and you switch it on person by person. Here's how it works and where it can surprise you.
What it does
When automatic breaks are on for someone, an unpaid break comes off their shift when they clock out, if the shift was long enough. You list the steps. The one that starts as the example is "over 5 hours, take 30 minutes". You can add more, for instance "over 10 hours, take 60 minutes".
The longest step a shift passes is the one that applies. A 4-hour shift gets nothing. A 6-hour shift loses 30 minutes. A 10½-hour shift loses 60.
If the person already punched a break on the clock, that counts first. The automatic break only tops it up to the step's length. Someone who took 20 minutes gets 10 more. Someone who took 40 gets nothing extra.
Setting it up
- In the Back Office go to Team → People and open the person.
- Under Pay, tick Automatic breaks.
- Set the steps. Each step is "Over (hours) → break (minutes)", and it starts as 5 hours and 30 minutes. Add a step adds another. Each break has to be shorter than the shift it's for, and a step can be for shifts up to 16 hours.
- Save.
The question mark beside Automatic breaks explains it in a sentence. Switch it off again and nothing is taken off that person's timecards automatically.
It's per person on purpose. A casual on short shifts, a salaried manager and a full-timer may all be handled differently, and that's your call and your award's. Servatto doesn't know which rules apply to your staff, so it asks you.
Where you see it
On Team → Timecards:
- The Breaks tile shows total break time, and how much of it was automatic.
- A person's shifts carry a small pill, such as "30 min auto break".
- Open a shift and the timeline has a line like "Automatic break: 30 min taken off". It names the rule that applied, says whether the person punched a break, and notes that the break comes off the total at no set time. That last part matters: a timecard doesn't pretend they went at 1:15.
If a shift went over five hours with a clock-out and no break at all, a No break pill warns you. That's handy for people who don't have automatic breaks on.
When it's wrong
Your team will have days where the rule doesn't match what happened. Maybe the person took their break and a half, or none at all. A manager can change it on the timecard.
- Type a number in Unpaid break (minutes) and save. That number is the person's from then on. The hint says it "stays as it is when the times change".
- Clear the box to go back to automatic.
- If you change the start or finish of a card that's still on automatic, the break is worked out again for the new length. A 6-hour shift cut to 4 hours loses its 30 minutes. Changing a card's times needs a note saying why, and the timeline keeps who changed what.
A shift where the clock-out was forgotten gets no automatic break. It's closed for you to set the real finish. Once you set it and save, the break is worked out for the shift as you've set it.
Paid or unpaid
A separate setting decides whether breaks count as paid. Under Settings → Team & pay → Pay & holidays, Breaks are paid is a tick box that only the owner can change. Leave it off if the breaks on timecards are unpaid, which is what an automatic break is.
With it off, the break comes out of the paid hours. With it on, it's recorded but still paid. The payroll CSV has a break column either way, so whoever does your pay can see what was taken off.
Rosters
If you build the weekly roster in Servatto, a new shift's unpaid break follows the same steps for that person when automatic breaks are on. If they're off, a shift over 5 hours starts with 30 minutes. You can change the break on any shift.
What it doesn't do
- It doesn't know your award, your agreement or what's right for your staff.
- It doesn't send anything to a payroll product. You export a file.
- It doesn't work out overtime or penalty rates.
- It doesn't make anyone take a break. It adjusts the hours.
Before you switch it on
Write down who it's for and the steps, so the next manager knows. Try it on one person for a week, then compare their timecards with what you'd have paid by hand.
Questions: [email protected].
Servatto publishes this post and sells the software described in it.