Bottled drinks and bags of beans at the counter: barcode scanning and GST-free items
15 November 2026
Plenty of cafés sell a few things that aren't made to order: bottled drinks, bags of beans, a shelf of snacks. They have a barcode on them, and ringing each one up by hand through the menu is slow when there's a queue. They can also raise a GST question, because not every packaged item is treated the same way.
Here's how the Servatto Register handles both. Scanning is for packaged goods you already have barcodes for. GST-free is a tickbox on the item.
Scanning: three steps
1. Put the barcode on the item. In the Back Office go to Menu → Items, open the item and, in the sizes table, fill in the SKU and Barcode columns. Each size has its own, so a 250 g bag and a 1 kg bag can carry different codes. You can edit these where your menu is kept in Servatto.
2. Turn the scanner on at the till. A manager opens Settings → Hardware → Barcode scanner and ticks Use a barcode scanner. Scan something and the card shows Last scan. Any USB or Bluetooth scanner that types like a keyboard will work.
3. Scan. Someone needs to be signed in at the till. Scan the item and it goes on the bill.
When a scan doesn't add anything
The till tells you why:
- "No item has the barcode …": the code isn't saved on any item. Add it as the SKU or barcode, then tap Refresh menu on the till so it picks the change up.
- A "Which item is …?" list: two items share the same code. The till asks instead of guessing. Tap the right one, and give each item its own barcode to stop the question coming up.
- "A payment is under way": don't scan during a payment. Scan again once it's done.
- Nothing at all: check the scanner is switched on for that till, and that someone's signed in.
Two small things that save headaches. The till ignores spaces in a code. And a 12-digit UPC-A code is treated as the same as the 13-digit EAN-13 version with a zero on the front, so it doesn't matter which one the packet shows or which one you typed.
GST-free items
In the Back Office, on the same item page, there's a Tax card with a GST-free tickbox. Tick it and save. The page says it plainly: basic food and some drinks carry no GST on receipts or in reports.
What changes once it's ticked:
- The till charges no GST on that item. On a bill with a GST-free item and a taxable one, the GST is worked out on the taxable part.
- The receipt marks GST-free items.
- Reports follow. The BAS / GST worksheet in Reports shows GST-free sales as their own column.
A discount on the whole bill comes off the taxable and GST-free parts in proportion, and the till works the GST out on what's left.
Which of your items are GST-free is a matter between you and your accountant. Servatto doesn't decide that for you, and this post isn't tax advice. If you aren't sure about a product, ask before you tick the box, and ask again if the product changes.
Check Settings → Taxes if the business-wide GST setting looks wrong. It says where GST is set for your business.
Setting up a shelf of packaged goods
- Get a list of what you sell with a barcode: the code on each packet.
- Add each as an item, with a price, and type the barcode into the Barcode column. Use the SKU column for your own code if you have one.
- Tick GST-free only for the items you've confirmed with your accountant.
- Turn on the scanner at the till and scan each item once on a test bill.
- Check the receipt: the GST-free items should be marked, and the GST line should look right.
What this doesn't do
This is a scanner that adds items to a bill, and a GST-free tickbox. It's about ringing sales up, not about counting stock. A code that isn't saved on an item won't add anything, so a new product needs its barcode typed in before it'll scan.
For a handful of grab-and-go items, a scanner and ten minutes of typing in codes can save the person at the counter a lot of tapping.
Setup help is at [email protected].
Servatto publishes this post and sells the software described in it.