A second kitchen screen nobody can tap by accident: View only mode in Servatto Kitchen
16 November 2026
Many cafés end up with a second screen. One by the espresso machine so the barista can see what's coming. One on the wall above the pass. One at the sandwich bench.
The trouble is that a touchscreen at head height gets touched. A sleeve brushes it, a tray leans on it, and an order is marked ready that isn't. Servatto Kitchen now has a setting for that: View only.
What it does
Switch View only on for a screen and that screen becomes a window onto the board. It still shows:
- live orders as they come in
- notes and removals
- timers, with their amber and red colours
- the new-order sound
What it can't do is change anything. On a view-only screen the bump bar is gone from the tiles, and in an order's detail there are no Accept, Ready, Cancel or Not ready buttons. It can't:
- accept or reject an order
- mark it ready, hand it off, or cancel it
- return it to preparing
- change the prep time
- tick items off as made
If someone does try, the screen says, "View only screen: orders can't be changed here. Turn View only off in Settings."
What you can still do
A view-only screen isn't locked down completely. You can still open an order to read it, open Order history, and print a docket or label from it. You can also tap Dismiss on a cancelled-order alert, which clears the alert on that screen only.
How to turn it on
- On the screen you want to make view only, tap the gear (⚙) at the top right.
- Open Settings → Display & device.
- Switch on View only.
A View only chip appears at the top of the board so everyone can see what mode the screen is in. Tap it to go straight back to Settings.
It's per screen
The setting belongs to that one screen. It's off by default, it doesn't change any other screen at the venue, and it's remembered on that device only. So your main pass screen carries on working as it always did, and the wall screen next to it can be view only.
If you want to start again, Reset this screen puts the display and sound choices back to the venue's defaults, which also turns View only off.
Two things to know before you rely on it
There's no PIN on the switch. Anyone using the screen can open Settings and turn View only off. It stops accidents, not a determined tap. If you need something stricter, this isn't it.
A view-only screen doesn't tell the system an order has been seen. If you've set a new-order sound to repeat until someone taps the order, it will keep ringing until a different screen accepts the order. So don't set up a view-only screen as your only screen. Keep at least one with View only off, where the person who runs the pass acts on orders.
Where it fits
- A prep bench or station screen where staff need to see what's on, not run it.
- A wall-mounted screen that the whole kitchen glances at.
- A trainee's screen that you'd rather they watched before they started bumping.
It isn't a customer screen. If you want customers to see when their order is ready, that's the order-ready Screen, a separate product.
A small checklist
- Decide which screen is your working one. Leave View only off there.
- On each extra screen, switch View only on in Settings → Display & device.
- Place a test order. Check the view-only screen shows it, with sound and timer, and that tapping it can't move it.
- Bump the order on the working screen and watch it update on the other.
That's the whole feature: one switch, per screen, that turns a touchscreen into something safe to hang on a wall.
If you don't use Kitchen yet, it has a 14-day free trial with no card needed.
Setup help is at [email protected].
Servatto publishes this post and sells the software described in it.