Skip to content
Servatto
ProductsHow it worksPricingBlogHelp Sign in
Sign in Start free
Blog

Swapping a tablet or moving a till to another shop without losing a sale

18 November 2026

The till tablet is cracked, or it's finally time for a newer one. Or you're opening a second shop and the spare till is sitting at the first. Either way a Servatto Register needs to be signed out of one place and set up in another.

Servatto makes you do this in a sensible order, on purpose. A till can hold sales that haven't reached Servatto yet, bills that haven't been paid, and a cash drawer that's still open. Moving it wipes the old shop's data from the tablet, so the till stops you if any of that is still there.

The checklist

Do this after close, when the shop is quiet.

  1. Get the till online and wait for the status to say Online. If it says "Offline · N to sync" or "Syncing N", wait until it's at zero.
  2. Pay or void every saved bill. Go to Open orders and either take payment or void each one. If you're unsure which to use, a bill nobody has paid is voided, and a bill someone has paid is refunded.
  3. Close the cash drawer. On the till go to Cash → End of day · cash up, count, and close it.
  4. Sign out of the till. Settings → General → Sign out of this till. A manager types their PIN, and it's checked online, so the till needs the internet for this step.
  5. Set up the new tablet or the new shop. See below.

Signing out is the same as pressing Remove on that till in the Back Office. The till disappears from your device list and stops working until it's paired again. Staff who only want to leave the till use the Sign out at the bottom of the left bar instead. That's a different button.

What the till says if you skip a step

It won't let you carry on, and the message tells you why:

  • "N still to sync. Connect to the internet and wait for it to reach 0 before un-pairing."
  • "N unpaid bills are still open on this till. Take payment or void them before un-pairing."
  • "The cash drawer is still open. Count and close it before un-pairing."

Moving to another venue has its own versions of the sync and drawer messages. If you've already started and need to go back, pair the till to its old shop again, finish the checklist, then move it.

Setting up the new tablet

You have two ways in.

  • Sign in with email. On the tablet, open Servatto Register, tap Sign in with email, sign in as an owner or manager, pick the shop, name the till, and tap Set up this tablet.
  • With a code. In the Back Office go to Devices → Add device → Register, pick the location, and Generate pairing code. On the tablet tap Pairing code or QR, type the code or scan the QR, and tap Connect. Back in the Back Office, tap Tablet paired — verify connection and finish the checks.

Before you buy a tablet, the hardware guide lists the recommended spec for a till.

If the tablet is lost or dead

You can't sign out of a tablet you don't have. In the Back Office go to Devices → Registers and press Remove next to it. It signs the till out straight away, so nothing more is accepted from it.

Past sales keep the old till's name. A removed till keeps its unsent sales, its bills and its cash drawer on the device, and sends them when it's paired again to the same shop. So if the tablet comes back to life, pair it to the same shop and the screen shows how many items are waiting.

A drawer left open on a till that's gone

If a till was removed while its drawer was still open, nobody can close that drawer from the till. An owner or manager can close it in the Back Office.

  1. Go to Reports → Cash drawers and click the open drawer.
  2. Under Close this drawer, type the cash you counted and a reason, such as "Till was removed and paired again".
  3. Press Close this drawer, then confirm.

Servatto warns you that the till can no longer add to it, and that it goes on the record. The close is written to the activity log.

If you're on the till itself and it says "That drawer session was not found", the till offers Close it here. It sends the opening cash, every pay in and pay out, and your count.

Removed by mistake?

Nothing is lost. Make a new pairing code in the Back Office and pair the till again to the same shop, and anything waiting on it sends.

The short version

Online, no unsent sales. Every bill paid or voided. Drawer closed. Sign out with a manager PIN. Then set up the new tablet.

Questions: [email protected].

Servatto publishes this post and sells the software described in it.

Servatto

Connected POS and ordering software for cafés and takeaways, made in Australia.

Products

  • Register
  • Kitchen
  • Kiosk
  • Screen
  • Manager app
  • Crew app
  • Back Office

Servatto

  • How it works
  • Pricing
  • What's new
  • Blog
  • Download the apps
  • Help Centre

Account

  • Sign in
  • Start free
  • Try Kitchen, Kiosk and Screen free for 14 days
  • [email protected]
  • Privacy
  • Terms
© 2026 ServattoPrices in AUD, GST included